EasyManua.ls Logo

Furman Elite15DM User Manual

Furman Elite15DM
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ELITE 15 DM OWNER’S MANUAL
Question and Answer IconNeed help?

Do you have a question about the Furman Elite15DM and is the answer not in the manual?

Furman Elite15DM Specifications

General IconGeneral
Input Current15A
Output Receptacles8
Surge ProtectionYes
Noise FilteringYes
Input ConnectorNEMA 5-15P
EMI/RFI FilteringYes
Outlets8
Input Voltage120V
Circuit Breaker15 Amp

Summary

The Elite 15 DM Features

Introduction

Installation

Unpacking

Inspect carton for damage, contact carrier if needed, save packing materials.

Safety Information - Warnings

Power Source

Ensure the power source is adequate for 15 Amps; check safety ground.

Placement

Connection

AC Cable Routing

Connect the unit's male Edison AC cord to an appropriate socket.

Connecting Components to the Digital - Video Component AC Outlet Banks

Use for critical video components like DVD players, projectors, plasma, or LCD screens.

Connecting Components to the Linear Filtering Power Banks

Use for components not connected to digital outlets; provides AC noise filtering.

AC Voltage and Current Meters

Monitors incoming AC voltage and total system current draw; features dimmer.

Soft Start - Continuous Use

Feature activated on power-up, indicated by an audible 'clack' from the relay.

AC Transient Voltage Surge Suppression and Extreme Voltage Shutdown

Extreme Voltage Shutdown Indicator

LED indicates AC wiring faults or if input voltage exceeds cutoff, shutting down power.

Protection OK Indicator

Blue LED indicates surge suppression status; dimming may signal compromised protection.

Telco – Satellite – Cable Transient Voltage Surge Suppressors

Provides surge suppression for telephone, cable, and satellite lines with minimal signal loss.

Warranty

Suggested AC Connection

Elite 15 DM SPECIFICATIONS

Related product manuals