FURMAN SOUND, INC.
1997 S. McDOWELL BLVD.
PETALUMA, CA 94954 U.S.A.
PHONE: (707) 763-1010
FAX: (707) 763-1310
Web: www.furmansound.com
E-Mail: info@furmansound.com
Introduction
Thank you for your purchase of a Furman IT-1210 10 Amp Balanced Power Isolation Transformer,
and congratulations on your choice. This specially wound and shielded toroidal isolation transformer
is designed specifically to reduce hum pickup by sensitive equipment when ultra-low-noise is a must.
Features
• Provides precisely balanced AC power for ultra-low-noise installations
• Typically gives a 16 dB improvement in background noise floor in system-wide installations
• Toroidal transformer with center-tapped secondary is the most efficient, compact design, with
least magnetic field leakage
• Soft Start circuit prevents turn-on transients and high inrush currents
• Faraday shield reduces electrostatic coupling between primary and secondary
• Extreme Voltage Shutdown circuit protects against dangerously high or low input voltages
• Microprocessor-control led "smart" AC voltmeter monitors line voltage, flashes alerts for
marginal and extreme conditions
• Provides basic power conditioning functions (spike suppression, RFI filtering)
• Ground fault interrupter (GFCI) protection
Description
To Next Page
Need help?
General
