How to fix Furrion DV3100S Car Receiver remote control that is not working?
If the remote control for your Furrion Car Receiver isn't working, first check the batteries to ensure they aren't flat. Then, make sure you're pointing the remote directly at the IR sensor on the unit, and that there are no obstacles blocking the signal between the remote and the sensor.
How to fix Furrion DV3100S Car Receiver when functions are locked or there is no response for Bluetooth function?
To unlock functions or resolve Bluetooth unresponsiveness on your Furrion Car Receiver, press the RESET button using a sharp object like a clip. This will reset the unit to its factory default settings.
What to do if my Furrion DV3100S Car Receiver has no picture but sound is OK?
If you're getting sound but no picture on your Furrion Car Receiver, make sure the video output is properly connected to your TV's video input. Also, ensure your TV is set to the correct AV input channel for the unit. Check the video connector for any damage and verify that the VIDEO setup of the unit is correct.
Why is my Furrion Car Receiver not producing any sound, even though the picture is fine?
If your Furrion Car Receiver has a picture but no sound, check these things: Ensure the unit's audio output is well-connected to the TV's audio input. Check the audio connector for damage. Make sure the volume isn't turned down or muted, and that headphones aren't plugged in. Also, ensure the AUDIO setup of the unit is correct.
What to do if my Furrion DV3100S has flaws in picture or sound?
If you're experiencing flaws in the picture or sound of your Furrion Car Receiver, check the following: Ensure the AUDIO setup is correct. Inspect the disc for scratches or stains, and check the AV connector and output terminal for stains. If there's condensation inside the lens, turn the unit off for about an hour before trying again. Also, make sure the installation angle is less than 30 degrees.
How to fix a Furrion DV3100S Car Receiver when some function buttons do not work?
If some function buttons on your Furrion Car Receiver aren't working, try turning the power off and then on again. If that doesn't work, reset the unit and turn it on again. Alternatively, remove the front panel from the unit, put it back, and then turn the unit on.
What to do if my Furrion DV3100S Car Receiver doesn't read the disc or indicates a bad disc?
If your Furrion Car Receiver isn't reading discs, ensure the disc is inserted correctly into the disc slot and that it's not inserted reverse side. Check if the disc is distorted, stained, or badly scratched. Make sure the disc format is compatible with the unit. If the car's temperature is too high, let the unit cool off. Try inserting another disc to see if that works.
Why my Furrion Car Receiver has no picture, sound and indication?
If your Furrion Car Receiver has no picture, sound, or indication, ensure that the power switch is on, the wall inlet is working, the power cord isn't damaged, and the power connection is secure.
Why is the picture on my Furrion DV3100S Car Receiver black and white, or why is the screen rolling?
If your Furrion Car Receiver is showing a black and white picture or the screen is rolling, ensure that the TV SYSTEM (e.g. PAL, NTSC) setup is correct.
What to do if the radio on my Furrion DV3100S Car Receiver does not work?
If the radio on your Furrion Car Receiver isn't working, check whether the antenna cable is connected firmly. You can also try manually tuning for a station.
General| Brand | Furrion |
|---|---|
| Model | DV3100S |
| Category | Car Receiver |
| Language | English |
To Next Page
