Furuno FAR-2228-BB Installation Manual

iv
SYSTEM CONFIGURATION
Standard connection
Basic configuration is shown with solid line. For footnotes, see "Notes" on page ix.
X-band (TR-UP), 12 kW/25 kW/600 W
NOTICE
IMO-type radar(s) must be interconnected to the following type approved sensors.
For other radar types, it is recommended to connect the following type approved sensors:
•
EPFS meeting the requirements of the IMO resolution MSC.112(73).
•
Gyrocompass (or equivalent devices) meeting the requirements of the IMO resolution A.424(XI).
•
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing units having approved
LAN ports.
100-230 VAC 1ø, 50-60 Hz
Transformer
USB Device*
9
440 VAC 1ø, 50-60 Hz
24 VDC
Rectifier
PR-850A
100/110/120 VAC
1ø, 50-60 Hz
USB Mouse
Switching Hub
HUB-100
Control Unit
RCU-014 or RCU-015 or RCU-031*
11
Monitor Unit*
3
MU-190 or
MU-231 or
MU-270W
Intelligent Hub
HUB-3000*
5
Gyrocompass*
1
(AD-10 format)
Gyrocompass*
1
(IEC61162 format)
AIS Transponder
EPFS*
2
(GPS)
SDME (Speed log)
AMS (IEC61162 format)
Sub monitor 1 of ECDIS*
8
Sub monitor 2 of ECDIS*
8
AMS (Contact)*
4
Sub monitor
Antenna
Cable*
10
100-115/220-230 VAC
1ø, 50-60 Hz (for de-icer)
Processor
Unit
RPU-025
100-230 VAC
100-230 VAC
Intelligent Hub
HUB-3000*
6
100-230 VAC
OR
100-230 VAC
VDR
(IEC61162-450 format)
Sensors
(IEC61162-450 format)
VDR (Analog RGB)
: Standard supply
: Optional or local supply
ECDIS
Control Unit RCU-016
For AC
power
For DC
power
*12
for FAR-2218(-BB)/2318, 12 kW
(
w/ Performance Monitor PM-32A
*7
)
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
for FAR-2228(-BB)/2328, 25 kW
(
w/ Performance Monitor PM-32A
*7
)
XN12CF-RSB128-106
XN20CF-RSB128-106
XN24CF-RSB128-106
for FAR-2228-NXT(-BB)/2328-NXT, 600 W
(w/ Performance Monitor PM-32B*
7
)
XN12CF-RSB128-123
XN20CF-RSB128-123
XN24CF-RSB128-123
Antenna Unit

Furuno FAR-2228-BB Specifications

General

Brand	Furuno
Model	FAR-2228-BB
Category	Marine Radar
Language	English