Furuno FCV-1200L User Manual

AP-5
SPEED INFO (OFF, ON)
NMEA VERSION (Ver1.5, Ver2.0, SPECIAL)
NAV DATA (LC, LA, DECCA, GPS, DR, AUTO)
COURSE (TRUE, MAG)
TLL OUTPUT (OFF, ON)
NAV DATA SETTING
TARGET ECHO TARGET ECHO (NORMAL, SURFACE, SQUID, DEEP SEA)
TEST MODE DIAGNOSTICS (NO, YES)
TEST PATTERN (NO, YES)
DEFAULT SETTING DEFAULT SET (NO, YES)
COLOR-7 (1-14, 3)
COLOR-6 (1-14, 3)
COLOR-5 (1-14, 3)
COLOR-4 (1-14, 3)
COLOR-3 (1-14, 3)
COLOR-2 (1-14, 3)
COLOR-1 (1-14, 3)
BACKGROUND (1-14, 3)
DEFAULT SET (NO, YES)
NET SONDE SETTING SONDE MARK (OFF, LF, HF)
USER COLOR SETTING
COLOR NO. (BKGD, ECHO1-ECHO15)
RED (0-15, 0)
GREEN (0-15, 2)
BLUE (0-15, 9)
DEFAULT SET (NO, YES)
USER CLUTTER SETTING
COLOR (1, 2, 3)
SONDE GRAPH (OFF, ON)
GRAPH MODE (SURFACE, BOTTOM)
GRAPH WIDTH (1/4, 1/2)
GRAPH RESET (NO, YES)
(Continued from the previous page)
WIDTH (2dots, 3dots, 4dots, 5dots)
STABILIZATION (OFF, ON)
SENSOR (SC50/110, SC30)
TD FORE-AFT (-100m - +100m; 0.0 m)
TD PORT-STBD (-100m - +100m; 0.0 m)
TD HEIGHT (0m - 100m: 0.0m)
STABILIZATION
* Setup for both high
and low frequencies

Furuno FCV-1200L Specifications

General

Brand	Furuno
Model	FCV-1200L
Category	Marine Equipment
Language	English