What to do if there is marine life on the transducer face of Furuno FCV-585 Marine Equipment?
If you notice marine life accumulating on the transducer face of your Furuno Marine Equipment, carefully remove it using a piece of wood or fine-grade sandpaper.
General| Display Type | Color LCD |
|---|---|
| Frequency | 50/200 kHz |
| Power Output | 600 W |
| Waterproof Rating | IPX6 |
| Waterproof | Yes |
| Operating Temperature | -15°C to +55°C |
| Resolution | 640 x 480 pixels |
| Frequency Range | 50 kHz and 200 kHz |
| Transmit Power | 600 W |
| Fish Finder Type | Digital |
| Voltage | 12 V |
| Beam Width | 45° / 12° |
| Power Supply | 12-24 VDC |
| Weight | 3.3 kg |
Operator responsibilities, manual usage, equipment modification, and brand trademarks.
Instructions for discarding the product and batteries according to local regulations and EIA guidelines.
Covers warnings and cautions for operating the equipment, including electrical hazards and proper use.
Covers warnings and cautions for installing the equipment, focusing on power, water leaks, and compass interference.
Welcome message, company reputation, and importance of proper operation and maintenance.
Diagrams showing how the FCV-620 and FCV-585 connect to power, GPS, and sensors.
Details standard and optional equipment supplied with the FCV-620 and FCV-585 models.
Identifies and explains the function of each control button and knob on the display unit.
Instructions for powering the unit on/off and adjusting display contrast and brilliance.
Guide to choosing display modes like single frequency, dual frequency, and zoom options.
Procedures for selecting the display range and adjusting the receiver gain manually or automatically.
Explains the basic procedure for accessing and operating the sounder's menus and sub-menus.
Details on picture advance speed, interference rejection, and low-level noise reduction.
How to display fish symbols, size, depth, and activate various audible and visual alarms.
Procedures for registering, editing, erasing, and setting destination waypoints.
Customizing the display of navigation data, including screen division and data selection.
Overview of the System menu structure and how to access its nine sub-menus.
Configuration of range settings, FUNC key programming, and system language selection.
Setting measurement units, calibrating parameters, and using demonstration modes.
Recommended monthly checks for transducer cable, display unit, and power supply integrity.
Instructions for cleaning components, replacing fuses, and understanding battery voltage alerts.
A guide to diagnosing and resolving common problems like no echo, low sensitivity, or interference.
Procedures for running diagnostic tests on the unit's controls, display, and data ports.
Considerations and procedures for tabletop and flush mounting the display unit.
Detailed guide for mounting thru-hull, transom, and inside-hull transducers, including necessary tools.
Procedures for installing optional sensors and routing cables, ensuring proper connections.
Connecting power, NMEA, and transducers, establishing ground, and configuring data sentences.
Details TX frequency, output power, display system, modes, and basic ranges.
Covers NMEA interface, power supply, ambient temperature, humidity, and waterproofing.
Dimensional drawings for FCV-620, FCV-585 display units, and the matching box.
Compliance statements for FCV-620 and FCV-585 regarding electromagnetic compatibility standards.
To Next Page
