Why is the sensitivity low on my Furuno Marine Equipment?
Low sensitivity on your Furuno Marine Equipment can occur due to several reasons: * Check the gain setting. * Air bubbles or marine life may be present on the transducer face. * Sediments in the water can affect sensitivity. * The seabed may be too soft to return a strong echo.
What to do if there is extreme interference or noise on Furuno Marine Equipment?
If you're experiencing extreme interference or noise with your Furuno Marine Equipment, consider the following: * Ensure the transducer is not too close to the engine. * Verify the unit is properly grounded. * Check for other echo sounders operating nearby on the same frequency.
What to do if no echo appears on Furuno Marine Equipment but fixed range scale appears?
If you see the fixed range scale but no echo on your Furuno Marine Equipment, try these steps: * Check if the display advance is set to "Stop." * Inspect the transducer plug to ensure it is properly connected. * Examine the transducer cable for any damage or loose connections.
How to fix Furuno Marine Equipment if neither echo nor fixed range scale appears?
If neither the echo nor the fixed range scale is appearing on your Furuno Marine Equipment, you should: * Check the battery voltage. * Check the fuse. * Check the power cable.
What to do if speed and/or water temperature readout is unrealistic or not shown on Furuno Marine Equipment?
If the speed and/or water temperature readout is unrealistic or not showing on your Furuno Marine Equipment, check the sensor connection.
What to do if echo appears but no zero line on Furuno Marine Equipment?
If an echo appears but there's no zero line on your Furuno Marine Equipment, consider the following: * Check if range shifting is set to "0". * Ensure the zero line is activated. * Verify that the draft is more than zero.
What to do if position readout is unrealistic or not shown on Furuno Marine Equipment?
If the position readout is unrealistic or not showing on your Furuno Marine Equipment: * Check the connection between the sounder and the navigator. * Check the navigator itself.
General| Brand | Furuno |
|---|---|
| Model | FCV-295 |
| Category | Marine Equipment |
| Language | English |
Details the function of each control button and dial on the FCV-295 unit.
Instructions on how to turn the unit on and off using the power button.
Explains how to adjust the screen brightness for optimal visibility.
Describes the seven available display modes and how to select them.
Covers manual and automatic range adjustments for depth display.
Details automatic and manual gain adjustments for echo sensitivity.
Covers user-specific settings for display customization and arrangement.
Provides a table of common symptoms and their remedies for normal operation.
Describes how to perform a self-test to check equipment operation.
Instructions for resetting the equipment to its factory default settings.
Technical specifications related to the echo sounder's performance.
Technical specifications for the display unit itself.
To Next Page
