Furuno FCV-295 - FUNCTION Control; Using the FUNCTION Control; Programming the FUNCTION Control

1. OPERATION
15
1.17 FUNCTION Control
The [FUNCTION] control provides for instant
display of a user-defined option’s window,
chosen with "FUNC Key" on the Key menu. 14
items are available: Pic. Advance, Interfer-
ence, Color Erase, Clutter, White Line, White
Marker, TVG (default setting), STC, Bottom
Zone, A-Scope, Split Range, Auto Shift, Freq
Choice and Freq Control.
1.17.1 Using the FUNCTION
control
1. Press the [FUNCTION] control to open
the setting window registered. (This win-
dow can also be opened by rotating the
control.)
2. Change setting as applicable.
1.17.2 Programming the FUNC-
TION control
1. Push and hold down the [FUNCTION]
control until the FUNC key setting window
appears.
2. Use S or T (or rotate the [FUNCTION]
control) to select the item you want to pro-
gram to the [FUNCTION] control.
3. Press the [ENTER] key or [FUNCTION]
control to confirm your selection.
Default setting for FUNCTION control