EasyManua.ls Logo

Furuno FCV-292 User Manual

Furuno FCV-292
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
All manuals and user guides at all-guides.com
all-guides.com
Question and Answer IconNeed help?

Do you have a question about the Furuno FCV-292 and is the answer not in the manual?

Furuno FCV-292 Specifications

General IconGeneral
BrandFuruno
ModelFCV-292
CategoryMarine Equipment
LanguageEnglish

Summary

SAFETY INSTRUCTIONS

Safety Notice Definitions

Defines DANGER, WARNING, and CAUTION safety levels.

OPERATOR SAFETY INFORMATION

Operator Warnings and Cautions

Safety guidelines for operating personnel regarding electrical hazards and usage.

INSTALLER SAFETY INFORMATION

Installer Warnings and Cautions

Safety guidelines for installation personnel concerning high voltage and proper procedures.

INTRODUCTION AND FEATURES

1. HANDLING PRECAUTION

4. OPERATING CONTROLS

5. BASIC OPERATION

ZOOM PICTURE SELECTION

AUTOMATIC OPERATION

MANUAL OPERATION

BASIC RANGE SELECTION

RANGE SHIFTING

GAIN CONTROL SETTING

PICTURE ADVANCE SPEED SELECTION

ELIMINATING LOW INTENSITY ECHOES

A-SCOPE PRESENTATION

MEASURING DEPTH TO FISH SCHOOL

6. FISH AND BOTTOM ALARMS

Fish Alarm Function

How the fish alarm alerts the user when echoes are within the preset range.

Bottom Alarm Function

How the bottom alarm alerts the user when the seabed enters the specified zone.

Alarm Activation and Silencing

Procedures for activating, deactivating, and silencing audible alarms.

CHANGING ALARM ZONE MARKER WIDTH

7. ADJUSTING PICTURE BY MENU

Noise Limiter Adjustment

How to reduce interference using the noise limiter function.

Clutter Level Adjustment

How to reduce low-level noise and blue dots from contaminated water.

SELECTING BACKGROUND COLOR AND ECHO COLOR (HUE SELECTION)

8. DISPLAYS

NAVIGATION DATA DISPLAYS

9. INTERPRETING THE DISPLAY

ECHO INTERPRETATION

DISPLAY NOISE AND AERATION

10. MAINTENANCE

Safety Warning for Maintenance

Crucial safety warning about opening the equipment during maintenance.

Fuse Replacement Procedure

Steps for replacing the fuse to protect the equipment.

11. TROUBLESHOOTING

Basic Troubleshooting Steps

Initial checks for common issues and problems.

DIAGNOSTIC SELF-CHECK

Self-Check Introduction and Procedure

Overview and steps for performing self-diagnosis on the unit.

TRANSDUCER CHECK

SPEED/TEMPERATURE SENSOR CHECK

12. INSTALLATION

Display Unit Installation

How to install the main display unit, including table-top mounting.

TRANSDUCER INSTALLATION

Transducer Mounting Location

Recommended positions for transducer placement for optimal performance.

SPEED/TEMPERATURE SENSOR INSTALLATION

CABLE CONNECTIONS

POWER CABLE CONNECTION

CONNECTION TO POSITION FIXING EQUIPMENT

GROUNDING PROCEDURE

13. SYSTEM MENU SETTING

System Menu Operation Procedure

Steps to navigate and configure system menus for customization.

SYSTEM MENU [1] DESCRIPTION

SYSTEM MENU [2] DESCRIPTION

SYSTEM MENU [3] DESCRIPTION

RESTORING FACTORY SETTINGS

14. SPECIFICATIONS

15. INPUT/OUTPUT DATA

17. POWER SUPPLY

ADJUSTMENT AFTER MAIN OR AMP BOARD REPLACEMENT

TRANSDUCER 50BL-12/50BL-24H

NEW BLT TRANSDUCERS

NEW BLT TRANSDUCERS SETTING

Related product manuals