Furuno FCV-295 - Menu Tree

AP-1
APPENDIX 1 MENU TREE
Sounder
Pic. Advance (4/1, 2/1, 1/1, 1/2, 1/4, 1/8, 1/16, Stop)
Zoom Mode (Bottom Lock, Bottom Zoom, Marker Zoom, Discrim1/2, Discrim1/3)
Free Shift (Off, On)
Auto Shift (Off, On)
Interference (Off, Low, Medium, High, Auto)
Freq Choice (Settings according to transducer connected.)
Freq Control (Settings according to transducer connected.)
Color Erase (0 - 50%; 0%)
Clutter
Gain Area (All, Normal)
White Line (0 - 100%, Edge; 0%)
White Line Color
White Marker
TVG
STC
Smoothing (Off, On)
Bottom Zone (Select are where to show bottom echo.)
Bottom Search (Auto, LF, HF)
Echo Stretch (Off, On)
1
Bold Italic: Default
HF Clutter (0 - 100%; 40%)
HF Curve (Std, Linear, H, L, S, Custom)
LF Clutter (0 - 100%; 40%)
LF Curve (Std, Linear, H, L, S, Custom)
White Line Color (White, RGB adjustable)
Default (Yes, No)
HF TVG Level (1 - 8; 4)
HF TVG Distance (100 - 3000 ft; 600 ft)
LF TVG Level (1 - 8; 4)
LF TVG Distance (100 - 3000 ft; 600 ft)
HF STC (0 - 10; 0)
LF STC (0 - 10; 0)
TxRx
Tx Pulse Edge (Off, On)
Tx Pulse (Short1, Short2, Std, Long, Manual)
Pulse Length (0.05-5.0 msec; 0.05 msec)
Rx Band (Narrow, Std, Wide)
Same items and settings as [HF].
[HF]
[LF]
Tx Power (Off, Min, 1 thru 10, Auto)
Tx Rate (1 - 20, S, Auto)
Target Echo (Normal, Surface, Squid, Deep Sea)
MENU/ESC
key