COLOR LCD SOUNDER FCV-620/585
Operator’s Guide
The purpose of this guide is to provide the basic operation for this equipment. For more detailed
information, see the Operator’s Manual.
Control Function
MENU/ESC
• Opens/closes menu.
• Escapes from current operation.
• Goes back one hierarchy level in menu operation.
• Closes setting window.
STWX
(TrackPad)
• Moves cursor on the menu.
• Adjusts settings.
• Moves VRM (Variable Range Marker) by using S or T except for nav mode.
ENTER
• Saves settings.
• Advances one hierarchy level in menu operation.
RANGE
• Opens display range setting window.
- Choose range setting method (Auto or Manual) by using W or X.
- On manual mode choose range desired by using S or T.
MARK Outputs L/L (latitude/longitude) position to a plotter.
FUNC Opens menu window registered.
GAIN
• Rotating: Adjusts gain.
• Push: Opens automatic gain setting window.
- Choose gain mode by using S or T.
- Adjust gain offset by using W or X.
MODE
Selects a display mode among the following; NAV1: nav data mode 1, ZOOM (LF):
LF + zoom mode, LF: LF single mode (50 kHz), DUAL: dual frequency mode, HF:
HF single mode (200 kHz), ZOOM (HF): HF + zoom mode, NAV2: nav data mode 2.
/BRILL
• Turns power on/off.
• Opens display contrast setting window or brilliance setting window.
- Choose Contrast or Brill by using S or T.
- Adjust contrast or brilliance by using W or X.
Transducer frequency (50 kHz/200 kHz)
Picture advance speed
(or Battery voltage)
Alarm icon
Range scale
TrackPad
ain, Range
Color bar
Fish
Bottom
Depth
VRM
Echo detected by high-frequency (HF)
Echo detected by low-frequency (LF)
Display unit (for FCV-620)
To Next Page
General
