EasyManua.ls Logo

Furuno FCV-582L - TVG Level and Echo Offset

Furuno FCV-582L
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
2.5 TVG Level
TVG (Time Varied Gain) compensates for
propagation attenuation of the ultrasonic
waves. It does this by equalizing echo pre-
sentation so that fish schools of the same size
appear in the same density in both shallow
and deep waters. In addition, it reduces sur-
face noise. Note that if the TVG level is set
too high short range echoes may not be dis-
played.
1. Turn on the power while pressing any key.
2. Press the ZOOM key three times. The
start-up screen appears and shortly there-
after the TVG SELECT display appears.
TVG SELECT
▲▼ : 50kHz
50kHz= 5(0 9)
200kHz= 5(0 9)
- + : 200kHz
Figure 2-5 TVG select display
3. Operate appropriate key among [], [],
[+] or [–] to set level.
4. Press the POWER key to escape.
2.6 Echo Offset
The echo offset feature functions to compen-
sate for too weak or too strong echo level. If
the on-screen echo level appears to be too
weak or too strong and the level cannot be
adjusted satisfactorily with the GAIN control,
do the following to adjust echo level:
1. Turn on the power while pressing any key.
2. Press the SIG LEV key three times. The
start-up screen appears and shortly there-
after the ECHO OFFSET display appears.
ECHO OFFSET
▲▼ : 50kHz
50kHz= 0(-99 +99)
200kHz= 0(-99 +99)
- + : 200kHz
Figure 2-6 Echo offset display
3. Operate appropriate key among [], [],
[+] or [–] to set level.
4. Press the POWER key to escape.

Related product manuals