The yellow progress bar along the bottom will travel across the
screen. When it gets to the righthand side, the screen will go dark. At
this stage, the power key is GREEN. This indicates that the
TZTL12F/15F is still in an update process.
Do not turn the power off
After approximately 4 minutes, the unit shuts completely down. This
is indicated when the power key turns from GREEN to ORANGE.
MFD ON MFD OFF
8. After the MFD powers down (ORANGE), remove the software
microSD card out of the back-card slot of the TZTL12F/15F.
9. Re-install the microSD chart card that was removed earlier. Replace
the chart card cover.
10. Turn the power on and confirm that the version indication on
the startup window is correct.
End of Part 1, update to OS and APP
Continue to Part 2 of TZtouch2 version 6.21 software update
To Next Page
Loading...
