Furuno TZT19F User Manual

Icon (home/displays), power switch operations
Operational Overview
How to select a display
MULTI FUNCTION DISPLAY
TZT12F/TZT16F/TZT19F
Operator’s Guide
Model
This guide provides the basic operating procedures for this equipment. For detailed information, see the Operator’s
Manual on the WEB site. You can get the latest version of the manual by accessing the quick response code at the
back of this guide. Connection of sensors required.
iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and product
names are trademarks, registered trademarks or service marks of their respctive holders.
The screenshots used in this guide were mainly taken from the TZT19F.
Power switch
Power switch
- Turns on power
- Shows [Quick Access] window.
Power offPower offPower off
Power offPower off
Device: Powers off
this unit.
Network: Powers off
all NavNet TZtouch3
units in network.
Day
Swipe downward from top of display
Quick pageQuick pageQuick page
Quick pageQuick page
Home screenHome screenHome screen
Home screenHome screen
Displays the
home screen.
Home icon
Home icon
Display icons
(max. 16 on home screen)
Home screenHome screenHome screen
Home screenHome screen
Long tap a display icon to edit, delete, resize, or
change its location.
Display icon long tapped
Edit
Delete
Size
(large or
small)
Tap
“eGuide” provides
an abbreviated
operator’s guide.
How to edit a display icon
How to edit a display icon
Tap a display icon on the home screen
Tap a display icon on the home screen
OR
OR
Tap a display icon on the quick page
Tap a display icon on the quick page
www.furuno.com
Tap
Brilliance, Hue
Brilliance, HueBrilliance, Hue
Hue:
Brilliance:
Tap
TZT12F
䠄
Right side of the Panel
䠅
TZT12F
䠄
Right side of the Panel
䠅
Tap
TZT16F/TZT19FTZT16F/TZT19F

Furuno TZT19F Specifications

General

Brand	Furuno
Model	TZT19F
Category	Monitor
Language	English

Summary

Operational Overview

Icon and Power Switch Operations

Describes how to access the home screen and use the power switch for device or network shutdown.

Touchscreen Operations

Basic Touch Gestures

Covers tap, drag, and swipe gestures for selecting items and navigating menus.

Advanced Touch Gestures

Explains pinch and two-finger drag gestures for zoom and viewpoint adjustments.

Plotter Features

Data Area and Data Boxes

Data Box Settings

Points and Boundaries

Entering and Setting Points

Points List and Boundary Setup

Route Management

Creating and Following Routes

Radar Operations

Switching Modes and Adjusting Controls

Covers switching radar between standby and TX, and adjusting gain, sea clutter, and rain clutter.

ARPA Operation

ARPA Symbols and Acquisition

Covers showing/hiding ARPA symbols and manually or automatically acquiring targets.

Displaying ARPA Target Data

CPA/TCPA Alarm System

Setting and Acknowledging Alarms

Details how to set CPA/TCPA alarm values and acknowledge active alarms.

AIS Operations

AIS Symbols and Target Data

Covers showing/hiding AIS symbols, target types, and displaying AIS target data.

Proximity AIS Alarm

Fish Finder Basics

Frequency Selection

Fish Finder Controls

Operating Mode Selection

Range and Gain Adjustments

Fish Finder Advanced Features

Zoom Display and Bottom Features

ACCU-FISH and Related Technologies

Instrument Display Configuration

Enabling and Switching Displays

Editing and Adding Indications

Wireless LAN Setup: Connection

Connecting to an Existing LAN

Instructions for connecting the device to an existing wireless local area network.

Wireless LAN Setup: Network Creation

Creating a Local Wireless Network

Guides on creating a new local wireless network for device connectivity.