Need help?Do you have a question about the Furuno NavNet TZtouch3 Series and is the answer not in the manual?
Specifies the models of the multi-function display covered in this manual.
Critical warnings indicating conditions that could cause death or serious injury if not avoided.
Cautions indicating conditions that could cause minor or moderate injury if not avoided.
Details on operating the multi-function display unit via touchscreen and keys.
Introduction to the chart plotter function, its capabilities, and how it displays position data.
Introduction to the radar system, its operation, and how it detects objects.
Introduction to the sounder display, how it shows echoes, and transducer connection.
How to mark a man overboard position on the plotter and radar displays.
Overview of the various Chart Plotter alarms and how they alert the user.
How to enable and use the NAVpilot autopilot system with the NavNet TZtouch3.
Introduction to the 3D display, its features, and how it enhances navigation.
Detailed instructions on how to enter points and event marks using different methods.
How to navigate to a selected point, including restart and stop functions.
Step-by-step guide on creating routes by selecting positions or existing points.
How to start and follow a route on the chart plotter display.
How to switch the radar between transmit and stand-by states for operation.
How to adjust the radar gain (sensitivity) for optimal echo display.
How to adjust the sea clutter control to reduce unwanted wave echoes.
How to adjust the rain control to reduce interference from rain or snow.
How to set up a guard zone to provide audible and visual alarms against targets.
Details on operating the ARPA (Automatic Radar Plotting Aid) system.
Explains how the fish finder calculates distances and displays echoes based on strength.
How to adjust the gain manually or automatically for optimal echo visibility.
How to use the clutter function to reduce noise and unwanted spots on the display.
How fish alarms alert the user to echoes within selected areas or near the bottom.
How to customize instrument displays by adding, removing, or rearranging indications.
How the system calculates and displays remaining fuel based on consumption.
How to display engine information from compatible Yamaha engines.
How the proximity AIS target alarm alerts when a target is within a specified distance.
How the CPA/TCPA alarm warns of potential collision courses with tracked targets.
Routine maintenance checks to keep the equipment in good condition.
Simple troubleshooting procedures to restore normal operation.
To Next Page
General