4. POINTS, BOUNDARIES
4-21
[ID]: Point no. ([Start] or [Goto])
[BTW]: Bearing to Goto point
[SPEED]: Speed to Goto point
[DISTANCE]: Distance from starting point
[TOTAL]: Total distance from start to Goto point
[TTG]: Time to go to the Goto point, using speed shown in [SPEED] column.*
[TOTAL]: The time from start to the Goto point.*
* Calculated by the value in the [SPEED] column.
4.16 How to Restart or Cancel Navigation to a Point
4.16.1 How to restart navigation to a point
When you go to a point, you can restart the
navigation to the point from the current loca-
tion.
When you steer to keep away from an obstruc-
tion or the ship drifts, you go off course as
shown in Line 1 in the figure. If you do not need
to return to the original course, you can go to
the point from the current position as shown in
Line 2 in the figure.
You can restart navigation by two methods:
From navigation bar
Tap the [Restart] button in navigation bar.
From the pop-up menu
1. Tap the purple line or the yellow line of the route to display the pop-up menu.
2. Tap [Restart]. The route start position for the route moves to the current position.
4.16.2 How to cancel navigation to a point
From navigation bar
Tap the [STOP] button in navigation bar.
From the pop-up menu
1. Tap the purple line or the yellow line of the route to display the pop-up menu.
2. Tap [Stop Nav]. The route start position for the route moves to the current position.
The set course, yellow line, XTE lines, arrival area, and the navigation bar are erased
from the screen.
From the slide-out menu
Open the slide-out menu, then tap [Stop Nav].
Line 2 (restart)
Line 1
Obstacle
Original course
To Next Page
Loading...
Need help?
General