Furuno MU-201CE User Manual

1
MONITOR UNIT MU-201CE/MU-231CE
OPERATOR'S MANUAL
This manual describes only the key operations of the monitor unit MU-210CE/MU-231CE.
For other details, refer to the installation manual and operator’s manual of the ECDIS/radar.

1. Overview
When the monitor unit MU-201CE or MU-231CE is connected to a radar/ECDIS
with an RS-232C cable, the keys on the panel are locked, so independent
operation of the keys is not possible. Brilliance is controlled from ECDIS/radar.
Key function under lock condition
 Simultaneous pressing of Lock and Menu keys: Opens/closes the menu.
 Simultaneous pressing of Lock and Input keys: Choose an input signal.
 Simultaneous pressing of Lock and
keys: Turns the power on or off. To
turn it off, press more than five seconds.
The keys are unlocked with menu operation. See “Keypad lock” on page 6. The
key functions under unlocked condition are as follows.

key: Turns the power on or off. To turn the power off, press it more than
five seconds.
 + and -: Adjusts the screen brilliance when no menu displayed. With menu
displayed, these choose an item from the menu.
 Input: Chooses input signal to display (when no menu is displayed).
 Menu: Opens or closes menu.
 Enter: Confirms menu setting.
Lock
Menu Enter Input - +
LED
Operation Panel
LED lamp: lights when the monitor unit is turned on.

Furuno MU-201CE Specifications

General

Display Size	20.1 inches
Resolution	1600 x 1200 pixels
Brightness	250 cd/m²
Contrast Ratio	1000:1
Viewing Angle	170° horizontal, 170° vertical
Input Voltage	12-24 VDC
Aspect Ratio	4:3
Operating Temperature	-15°C to +55°C
Storage Temperature	-20°C to +60°C
Input Signal	DVI-D

Summary

1. Overview

Key functions under unlocked condition

Details key operations when the unit is not locked, including power, brilliance, input, menu, and enter functions.

2. Menu Operation

Main Menu Navigation Steps

Explains the process to open the main menu and select items using navigation keys.

Sub-menu Item Types Explained

Details the four types of items in sub-menus: Keys, On/off, Item lists, and Gauges.

Concluding Menu Settings

Provides steps to exit sub-menus and the main menu after setting changes.

3. Menu Functions Details

Main Window Image Settings

Recommended Default Image Settings

Provides recommended brightness, contrast, and color temperatures for models.

General Monitor Settings

Serial Mode and Monitor Communication

User Preferences and Settings Management

Factory Defaults Reset Function

Resets the monitor to its original factory settings.

Setup Selection and Save/Recall Operations

Input Selection Configuration

Main Screen Source Selection

Chooses the input source for the main screen display.

Main Screen Acquisition Settings

Mode Selection and Slot Details