What to do if my Furuno MU-231 has no picture?
If your Furuno Monitor displays no picture, ensure the cables are securely fastened. Also, verify the input signal and the settings in the DISP selection window. Finally, check that the display brilliance is not set to the minimum.
What to do if I can't turn off my Furuno Monitor?
If you cannot turn off the power to your Furuno Monitor, try pressing and holding the /BRILL key for eight seconds. If the slide switch is set to ON, turn off the external equipment connected to turn off the monitor.
General| Viewing Angle | 178° horizontal, 178° vertical |
|---|---|
| Input Voltage | 12-24 VDC |
| Operating Temperature | -15°C to +55°C |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1000:1 (Typical) |
| Weight | 7.5 kg |
| Input Signals | DVI-D, VGA |
| Dimensions (W x H x D) | 556 mm x 354 mm x 78 mm |
To Next Page
