Furuno NavNet TZtouch3 Series User Manual

4. POINTS, BOUNDARIES
4-24
4.17.3 How to set default boundary attributes
You can set the color, line type and transparency of boundaries on the [Points &
Boundaries] menu.
1. On the Home screen, tap [Settings]→[Points & Boundaries]. Scroll to find the
[BOUNDARIES] section.
2. Tap [Default Boundary Color].
3. Tap the color desired, then tap [<] on the title bar to go back one layer in the menu.
4. To change boundary transparency, adjust the slider bar at [Default Boundary
Transparency].
5. Tap [Default Boundary Contour].
6. Tap the line type desired.
7. Tap the close button at the top of the screen to finish.

Furuno NavNet TZtouch3 Series Specifications

General

Brand	Furuno
Model	NavNet TZtouch3 Series
Category	Monitor
Language	English