8. MULTI BEAM SONAR DFF-3D
8-6
8.3 Side Scan Display Operations
This section covers the functions available with the side scan display. For the menu
items shared with the conventional fish finder, see chapter 7. To show the [Side Scan]
menu, open the layers menu and then tap [Side Scan Settings]; or from the home
screen, tap [Settings]→[Multi Beam Sonar]→[Side Scan]. The procedures in this man-
ual, for sake of brevity, replace “open the [Side Scan] menu.”
Layers menu for side scan
8.3.1 How to switch between TX and STBY
Open the layers menu and then select [ON] for [TX/STBY] to start transmitting, [OFF]
to stop transmitting. "Stand-by" appears at the center of the screen when transmission
is stopped.
8.3.2 How to change echo color
You can select the echo color.
1. Open the [Side Scan] menu.
2. Tap [Echo Color].
3. Select [White], [Blue] or [Brown].
4. Tap the close button on the title bar to finish.
You can select the echo color from the layers menu.
8.3.3 How to show or hide the depth and frequency indications
You can show or hide the depth and TX frequency at the bottom left corner of the
screen.
1. Open the layers menu.
2. Select [ON] or [OFF] for [Depth Information].
To Next Page
Loading...
Need help?
General