9. FILE OPERATIONS
9-5
9.7 My TimeZero Cloud Data Service
With the TimeZero
™
cloud data service, you can share data (settings, points, routes
and tracks) stored in your TimeZero
™
cloud account with another NavNet TZtouch3
(requires software version 3.01 or after). To use the TimeZero
™
cloud data service,
connect to the internet and create a TimeZero
™
account.
9.7.1 How to save settings/data to the cloud
Do as follows to save settings data to the cloud.
1. Open the Home screen, then tap [Settings]→[General].
2. Tap [Login] at the [SOCIAL NETWORK] section and login to your TimeZero
™
ac-
count.
3. Tap "<" on the title bar to return to the [Settings] menu.
4. Tap [Files]→[Backup Settings in the Cloud]. If the file already exists in the cloud,
you are informed that the file exists and are you sure to proceed. Tap [OK] to write
over the existing file.
9.7.2 How to retrieve settings/data from the cloud
Do as follows to retrieve settings data from the cloud.
1. Open the Home screen, then tap [Settings]→[General].
2. Tap [Login] at the SOCIAL NETWORK section and login to your TimeZero
™
ac-
count.
3. Tap "<" on the title bar to return to the [Settings] menu.
4. Tap [Files]→[Restore Settings From the Cloud]. You are asked if you are sure to
retrieve settings. Tap [OK] to erase the message.
5. Tap [OK] to write over settings data stored in the MFD. If there is no settings data
in the cloud, a message informs you of no data. Tap [OK] to erase the message.
To Next Page
Loading...
Need help?
General