4. POINTS, BOUNDARIES
4-12
4.8.2 How to move a point using the pop-up window
1. Tap the point to move to show the pop-up window. See section 4.3.
2. Tap the latitude and longitude information at the top of the window to show the
software keyboard.
3. Change the latitude and longitude as necessary, the tap [9]. The position of the
point is then centered on the screen.
4.8.3 How to move a point using the Points list
1. Go to the Home screen, then tap [Lists].
2. Tap [Points] to open the [Points] list.
3. Tap the point to move to show the editing window.
You can also edit the position of a point from the screen. Tap the point then tap
[Edit] on the pop-up menu.
4. Tap [Lat Lon] to display the numeric keyboard.
5. Enter the position then tap [9] to confirm.
6. Tap the close button on the title bar to finish.
4.9 How to Delete Points
You can delete points by two methods, on the screen and from the [Points] list
Note: The point currently set as a Goto point cannot be deleted.
4.9.1 How to delete an on-screen point
Tap the point to delete, then tap [Delete] on the pop-up menu.
4.9.2 How to delete a point from the Points list
1. Go to the Home screen, then tap [Lists].
2. Tap [Points] to open the [Points] list.
3. Tap the point to delete, then tap [Delete]. The point disappears from both the
screen and the [Points] list.
4. Tap the close button on the title bar to finish.
4.9.3 How to delete all points
You can delete points and routes collectively except for the points included in the ac-
tive route.
1. Go to the Home screen, then tap [Settings]→[Points & Boundaries].
2. Tap [Delete All User Objects].
3. You are asked if you are sure to delete all user objects. Tap [OK].
Note: The “Cancel” icon does not appear when deleting all points.
4. Tap the close button on the title bar to finish.
To Next Page
Loading...
Need help?
General