12. INSTRUMENT-RELATED DISPLAYS
12-10
12.2.3 How to switch between instrument displays
Note: The data that can be displayed depends on the your system configuration.
Full-screen display
There are nine default full-screen displays, Sailing, Cruising, Single, Outboard, Twin
Outboard, Triple Outboard, Quad Outboard, Single Inboard, Highway?, and Twin In-
board.
You can show the full-screen instrument
display by these two methods.
• Swipe the screen leftward or rightward.
The name of the currently shown display
appears at the center of the screen.
• Tap the screen to show the instrument
screen selection window, shown right.
Three-way, four-way split screen
The default display screens in the 3-way,
4-way split screen are [Navigation],
[Graphs], [Environment], [Wind], [Numer-
ic], [Highway], [NAVPilot], [Single Engine],
[Twin Engines], [Triple Engines], and
[Tank]. The availability of a display de-
pends on your system configuration.
You can switch between the displays by
the following two methods:
• Swipe the screen leftward or rightward.
The name of the currently shown dis-
play appears at the center of the screen.
• Tap the screen to show the instrument
screen selection window, shown right.
To Next Page
Loading...
Need help?
General