6. RADAR
6-12
Method 2: Using the pop-up menu
1. Tap the radar display to show the pop-up menu, the tap [EBL]→[Adjust].
2. Operate the EBL so that it passes through the center of the target Drag the EBL
on the radar display, drag the knob on the slider, drag the EBL indication box, or
tap the “+” or “-” symbol. The current EBL bearing is shown in the EBL indication
box.
3. Tap [End EBL] at the top of screen to finish.
4. To clear the EBL, open the pop-up menu, the tap [EBL]→[Clear].
6.8.7 How to select the EBL reference
You can select the EBL reference from [True] or [Relative]. [True] means the bearing
is in reference to the north. [Relative] means the bearing is relative to the heading of
your ship. True bearing requires a heading sensor.
1. Open the Home screen, then tap [Settings]→[Radar].
2. Tap [EBL Reference].
3. Tap [True] or [Relative].
4. Tap the close button on the title bar to finish.
Tap [End EBL]
to anchor EBL
and exit.
Drag slider or tap bar
(or tap +, - symbol).
Drag
EBL
Bearing
to object
Bearing
to object
Tap
Tap
OR
To Next Page
Loading...
Need help?
General