To Next Page

To Previous Page

1. SYSTEM INTRODUCTION

1-19

1.7.2 How to edit a display icon

Long tap the display icon to edit to show the editing icons on the display icon. Tap the

applicable editing icon. Refer to the figure and instructions below.

Edit icon content: Tap the icon to show the [EDIT PAGE] display (see

subsection 1.7.1). Then, change the configuration as necessary.

Remove icon: Tap the icon to delete the icon from the Home screen.

Change icon size: Tap the icon to switch the size between large and small. Tap any-

where other than an icon to confirm change.

Change icon size

Long

tap

Remove icon

Edit icon content

Default Chapter7
- Table of Contents7
Foreword16
System Configuration19
1 System Introduction21
- Controls, Touchscreen Operations21
- Remote Control Units (Option)25
  - Remote Control MCU-00225
  - Remote Control Unit MCU-00426
  - Control Unit MCU-00528
  - Remote Control Unit Group Settings30
- How to Turn the Power on or off32
- How to Adjust the Brilliance of the Display and Hue33
- Home Screen35
- How to Select a Display36
  - How to Select a Display from the Home Screen36
  - How to Select a Display from the Quick Page37
- How to Edit the Display Icons38
  - How to Add a New Display Icon38
  - How to Edit a Display Icon39
- Edge Swipe Functions40
- Data Area42
  - How to Change the Order of the Data43
  - How to Change the Contents of a Data Box43
  - How to Add Data to a Data Area44
  - How to Delete a Data Box44
  - How to Change the Display Method for the Data in a Data Box45
  - How to Adjust the Transparency of the Data Area45
  - How to Display 3-Axis Speed from the SC-33/SCX-2046
- User Interface47
- Microsd Cards48
- Chart Plotter Introduction50
- Radar Introduction51
- Sounder (Fish Finder) Introduction52
- Settings Menu53
- Two-Finger Tap Function56
- Language57
- Man Overboard (MOB)57
- Wireless LAN Settings59
  - How to Connect the Existing LAN59
  - How to Create a Local Wireless Network61
- How to Create and Login to Your My Timezero ™ Account62
- PIN Code Lock64
2 Chart Plotter65
- Chart Type65
- Display Range66
- Orientation Mode67
- How to Move the Chart67
- The Boat Icon68
- How to Find Information Chart Object and Chart Information70
  - Chart Object Information70
  - Chart Information71
- How to Find the Range and Bearing between Two Locations72
- Multiple Chart Plotter Displays73
- Cartographic Text and Objects on Vector Charts74
  - Control Visibility of Text and Object Information in Vector Charts74
  - Control Visibility of Cartographic Objects in S-52 Charts75
- Alarms77
- Track82
- Chart Plotter Menu89
- Navpilot Series Auto Pilot90
- My Friends (Social Network)95
  - How to Setup My Friends95
  - How to Show or Hide the My Friends Display95
- TZ Iboat Functions96
- Photos96
500 D Display, Overlays99
- Display99
  - How to Activate the 3D Display100
  - How to Make the 3D View Clearer101
- Overlays102
4 Points, Boundaries111
- About Points & Event Marks111
- How to Enter Points, Event Marks112
  - How to Enter a Point (Plotter and Radar Displays Only)112
  - How to Enter an Event Mark113
- How to Display Point, Event Mark, Catch Information115
- How to Enter a Comment for an Event Mark115
- Default Point, Event Mark Settings116
  - Default Point Settings116
  - Default Event Mark Settings117
- How to Find Number of Points Used118
- Points List119
- How to Delete Points122
- How to Edit Points123
  - How to Edit an On-Screen Point123
  - How to Edit a Point from the Points List124
- How to Move a Point to the Screen Center124
- How to Show or Hide All Points, Points Names124
- How to Set Point Naming Functions125
- How to Set Point Density125
- How to Go to a Point126
- How to Restart or Cancel Navigation to a Point131
  - How to Restart Navigation to a Point131
  - How to Cancel Navigation to a Point131
- Boundaries132
5 Routes145
- What Is a Route145
- How to Create a Route146
  - How to Create a Route by Selecting Positions146
  - How to Create a Route with Points147
- How to Edit a Route148
- Routes List150
- How to Find Number of Routes Created154
- How to Find a Route on the Chart154
- How to Delete a Route154
- How to Show or Hide All Routes155
- How to Set Route Density155
- How to Follow a Route156
- Operations Available When You Follow a Route159
- SAR Operations163
- Fuel Level Indicators165
- Laylines166
- Routes Menu168
6 Radar169
- How to Transmit, Set the Radar in Stand-By169
- Tuning169
- How to Adjust the Gain170
- How to Reduce the Sea Clutter172
- How to Reduce the Rain Clutter172
- Range Scale173
- Orientation Mode173
- How to Measure the Range and Bearing from Your Ship to a Target174
  - How to Display the Range Rings174
  - How to Set the Number of the Range Rings to Show175
  - How to Select the Range Rings Mode175
  - How to Measure the Range and Bearing to an Object176
  - How to Measure the Range with the VRM177
  - How to Measure the Bearing with the EBL179
  - How to Select the EBL Reference180
- How to Measure the Range and Bearing between Two Targets181
- How to Off-Center the Picture181
- Heading Line182
- How to Reduce Radar Interference182
- Echo Average183
- Guard Zone183
  - How to Set a Guard Zone183
  - How to Activate or Deactivate a Guard Zone184
  - How to Hide a Guard Zone184
- Watchman185
- Echo Trail186
  - How to Show, Hide Echo Trails186
  - How to Clear Echo Trails186
  - How to Select Echo Trail Length186
  - How to Select the Echo Trail Mode (Reference)187
  - How to Select Echo Trail Color187
  - How to Select Echo Trail Shading188
- How to Show, Hide or Cancel an Active Route188
- How to Show or Hide the Own Ship Icon188
- Echo Color189
- Background Color189
- Dual-Range Display190
- Bird Mode191
- Target Analyzer192
- Connecting with FAR-2Xx7/Far-15Xx Series Marine Radars195
- Rezboost196
- Radar Menu197
- How to Interpret the Radar Display198
  - False Echoes198
  - Search and Rescue Transponder (SART)200
  - RACON (Radar Beacon)201
- ARPA Operation202
  - How to Show or Hide the ARPA Display202
  - How to Manually Acquire a Target203
  - How to Automatically Acquire a Target203
  - How to Automatically Acquire Targets by Doppler204
  - How to Display Target Data204
  - How to Stop Tracking Targets205
  - ARPA List205
  - How to Clear Lost Targets206
  - CPA/TCPA Alarm207
7 Fish Finder (Sounder)209
- How the Fish Finder Operates209
- How to Transmit, Go to Stand-By210
- How to Select a Display210
  - Single Frequency Display210
  - Dual Frequency Display211
  - Zoom Displays212
  - A-Scope Display (Display Only)213
  - Bottom Discrimination Display214
- How to Select the Range215
- How to Adjust the Gain215
  - Automatic Gain Adjustment215
  - Manual Gain Adjustment216
- How to Reduce Clutter217
- Picture Advance Speed218
- How to Reduce Interference219
- How to Erase Unnecessary Echoes219
- How to Measure Range, Depth to an Object220
- Echo History Display220
- How to Balance Echo Strength221
- Fish Finder Alarms222
  - How to Set an Alarm222
  - How to Activate or Deactivate an Alarm223
  - Alarm Sensitivity223
- Accu-Fish224
  - How to Set ACCU-FISH224
  - Fish Size Correction225
  - How to Turn the Fish Symbol Indication on or off225
  - How to Display the Fish Information225
  - How to Set the Minimum Size of ACCU-FISH ™ Symbols225
- Rezboost226
- White Edge226
- Temperature Graph227
- Preset Frequency with Fish Finder Power Amplifier DI-FFAMP228
- Fish Finder Menu229
- Interpreting the Display233
8 Multi Beam Sonar Dff-3D237
- Display Screens Overview237
- Multi-Sounder Display Operations240
- Cross Section Display Operations243
9 File Operations253
- File Format253
- How to Export User Objects254
- How to Import User Objects254
- How to Export, Import Track255
- How to Backup the Equipment Settings256
- How to Load the Equipment Settings256
- My Timezero Cloud Data Service257
  - How to Save Settings/Data to the Cloud257
  - How to Retrieve Settings/Data from the Cloud257
10 Camera/Video/External Equipment259
- How to Display a Video Image259
- Video Signal Types260
- How to Set the Camera Display261
- Control of FLIR Camera265
- Tracking Active Waypoint, MOB267
- Operating External Equipment267
11 FUSION-Link269
- FUSION Display269
- FUSION Operation Bar272
- FUSION Settings273
12 Instrument-Related Displays275
- How to Show the Instrument Display275
- Instrument Displays276
- How to Edit the Instrument Displays285
- Instrument Theme290
- Fuel Management System290
  - How to Manually Enter Fuel Tank Capacity290
  - How to Check Remaining Fuel Amount291
- Czone292
- Yamaha Engine Status Display300
13 Weather Operations305
- Weather Display Introduction305
- Navcenter Weather306
- Siriusxm Weather310
  - How to Set up for Siriusxm Weather311
  - How to Display the Siriusxm Weather Data312
- Weather Icons (Siriusxm Weather)313
- Weather Data (Navcenter or Siriusxm Weather)314
- Siriusxm Weather Diagnostics317
- Siriusxm Satellite Radio318
14 Ais, Dsc Message321
- What Is AIS321
- How to Show or Hide the AIS Symbols321
- AIS Target Symbols321
- Proximity AIS Target Alarm323
- How to Ignore Slow Moving AIS Targets323
- How to Display AIS Safety Messages323
- How to Display AIS Target Data324
- How to Show or Hide the Target Ids324
- AIS List325
- 14.10 Ais Sart326
- 14.11 CPA/TCPA Alarm327
- How to Register an AIS or DSC Target to the Buddies List328
- 14.13 CPA Graphic Display329
- 14.15 DSC Message Information331
15 Other Functions335
- General Menu335
- Units Menu337
- Initial Setup Menu339
- Facsimile Receiver FAX-30345
- How to Check for Software Updates346
- How to Manage Your Charts347
16 Maintenance, Troubleshooting351
- Maintenance351
- Fuse Replacement352
- Life of Parts352
- Troubleshooting353
Appendix 1 Menu Tree357
Appendix 2 Transducer List371
Appendix 3 Alert Messages374
Appendix 4 Radio Regulatory Information380
Specifications383
Index386

Brand	Furuno
Model	NavNet TZtouch3 Series
Category	Monitor
Language	English

Furuno NavNet TZtouch3 Series User Manual

Table of Contents

Other manuals for Furuno NavNet TZtouch3 Series

Questions and Answers:

Furuno NavNet TZtouch3 Series Specifications

Related product manuals