1. SYSTEM INTRODUCTION
1-16
The Sensor icons show the sensors connected in the system and their status, in the
following colors. White: Sensor normal; Red: Sensor error; Gray: Sensor inactive
(stopped).
The Functions section provides the features mentioned below. If the item is hidden,
drag up or down from [Settings]. ([MOB] is fixed.)
[MOB]: Enters a MOB mark (to mark man overboard location on the plotter and radar
displays). See section 1.18.
[Settings]: Menus (general, plotter, radar, sounder, etc.) for customization of the sys-
tem. See section 1.15.
[Tide]: Opens the tide graph.
[Charts]: Displays a list of charts stored in this equipment.
[Lists]: Accesses the lists (points, routes, boundaries, catches, photos, AIS, DSC,
ARPA, Alarms).
[FAX30]*: Opens the FAX-30 operation screen.
[Fusion]*: Opens the FUSION operation screen.
[SiriusAudio]*: Opens the SiriusXM Audio control panel.
[eGuide]: Opens the abbreviated operator’s manual. You can get the latest version of
the operator’s manual by accessing the quick response code provided in the introduc-
tion section of the guide.
* Requires appropriate equipment connection. Not shown otherwise.
The Display icons select corresponding displays. See the next section for details.
1.6 How to Select a Display
You have two methods from which to select a display, the Home screen and the quick
page.
1.6.1 How to select a display from the Home screen
Tap the [Home] icon to show the Home screen. Tap the applicable display icon. (It
may be necessary to swipe the screen if you have programmed a number of display
icons.)
Note: The display icons can be edited (size changed, layout rearranged, icon deleted,
etc.) See section 1.7.2.
Display icon (small)
Display icon (large)
To Next Page
Loading...
Need help?
General