EasyManuals Logo

Furuno NavNet TZtouch3 Series User Manual

Furuno NavNet TZtouch3 Series
393 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
2. CHART PLOTTER
2-19
2.11.2 How to show or hide the track display
Open the [Layers] menu and turn [Tracks] on or off.
2.11.3 Track recording interval
Tracks are recorded at specified time or distance intervals to the internal memory of
this unit.
A shorter interval gives a smoother, clearly reconstructed track, however the overall
distance/time that can be recorded is shorter.
When the positioning data source is one of the devices listed below, the following oc-
curs:
tracks are plotted at very short intervals for five minutes immediately behind your
vessel, regardless of the recording interval selected, to give you a more accurate
and smooth track.
track plotting reverts to the selected interval after the five minutes pass, or if record-
ing is stopped within the first five minutes.
For time-based intervals
1. Open the home screen, then tap [Settings][Ship & Track].
2. Tap [Track Interval][Time], then tap "<" to go back one layer in the menu.
3. Tap [Time Interval].
4. Tap a time interval.
5. Tap the close button to finish.
TZT 3 internal GPS SC-30
TZT2 internal GPS v6.01 or after SC-33
GP-330B serial no. 4457-8875 or after SCX-20
5 minutes
Uses very short interval
Uses your set interval setting

Table of Contents

Other manuals for Furuno NavNet TZtouch3 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furuno NavNet TZtouch3 Series and is the answer not in the manual?

Furuno NavNet TZtouch3 Series Specifications

General IconGeneral
BrandFuruno
ModelNavNet TZtouch3 Series
CategoryMonitor
LanguageEnglish

Related product manuals