Furuno NavNet TZtouch3 Series User Manual

14. AIS, DSC MESSAGE
14-12
14.15.4 The DSC list
When a DSC message is received, it is automatically saved to the [DSC] list. On the
screen, the MMSI number can be changed to a specified character string, such as the
name of the ship, in order to quickly identify which ship sent you a message.
How to display the DSC list
Open the Home screen, then tap [Lists]→[DSC]. The colored before each entry de-
notes DSC message type, red for distress, green for non-distress.
The title bar has buttons for sorting the list.
[Name]: DSC targets sorted in alphanumeric order.
[Range]: DSC targets sorted by range in ascending order.
[CPA]: DSC targets sorted by CPA in ascending order.
Note: To update the list, tape [Refresh].
How to show detailed information about a DSC marker
Tap the target on the [DSC] list to show its detailed information.
DSC
List sort buttons
Vertical bar

Furuno NavNet TZtouch3 Series Specifications

General

Brand	Furuno
Model	NavNet TZtouch3 Series
Category	Monitor
Language	English