15. OTHER FUNCTIONS
15-3
* In the demo mode, plotter display, you can relocate the boat icon to the location
tapped. Tap the screen where you want to relocate the boat icon, then tap [Move Boat]
on the pop-up menu.
15.2 Units Menu
The [Units] menu sets the unit of measurement for speed, distance, depth, etc. Open
the home screen, then tap [Settings]→[Units] to display the [Units] menu.
[Manual Demo]* [OFF]: Use the data file selected at [Demo File].
Your vessel moves according the data in the data
file.
[ON]: Your vessel moves at the speed set at [De-
mo Speed] below.
[OFF], [ON]
[Show Wel-
come Screen]
Show the welcome screen. -
[Show Wel-
come Screen at
startup]
In the [ON] setting, the welcome screen appears
at startup.
[OFF], [ON]
[Demo Slide
Show]
No use. [OFF], [ON]
[Demo Speed] Set the ship’s speed to use in the demo mode,
when [Manual Demo] is [ON].
0 to 50 kn
[Check for Soft-
ware Update]
Checks if your software is up-to-date. See
section 15.5.
-
[Reset Default
Settings]
Restore default settings for the items of the [Gen-
eral] menu.
-
Menu item Function Options
To Next Page
Loading...
Need help?
General