2. CHART PLOTTER
2-17
2.10.6 Wind speed alarm
The wind speed alarm tells you when the wind speed is over or under the limit set. Set
the value at [Wind Speed Alarm Value].
1. Tap [Wind Speed Alarm] on the [Alarm] menu.
2. Tap [Apparent] or [True] as required.
[Apparent]: Triggers the alarm when the apparent wind speed exceeds the set
speed.
[True]: Triggers the alarm when the true wind speed exceeds the set speed.
3. Tap [Wind Speed Alarm Value] to display the software keyboard.
4. Set the wind speed value, then tap [9].
5. Tap the close button to finish.
2.10.7 Low fuel alarm
The low fuel alarm informs you when your fuel level drops below the setting percent-
age of fuel).
1. Turn on [Low Fuel Alarm] in the [Alarm] menu.
2. Tap [Low Fuel Alarm Value] to display the software keyboard.
3. Set the value, then tap [9].
4. Tap the close button to finish.
Note: To disable this alarm, turn it off at step 1 of the above procedure.
2.10.8 Other Alarm menu items
The followings are the alarm menu items not previously mentioned.
[Hardware Alarm]: The [OFF] setting disables hardware-related alarms.
[Notification Sound]: Activate or deactivate the notification sound (for "Waypoint
Crossing" (see section 5.10), "End of Route" (section 4.15) or fish finder alarms
(section 7.13)).
[Alarm Sound when NAVpilot is engaged]: Activate or deactivate the notification
sound when the autopilot is engaged to or disengaged from this system.
[Alarm Sound]: Disable or enable the buzzer.
[Sound Alarm Until Acknowledged ]: Turn this item on to sound the aural alarm until
an alarm is acknowledged (see subsection 2.10.9).
[Save Log File]: Save alert list to microSD card.
[Reset Default Settings]: Select this menu item to restore default settings for the
[Alarm] menu.
To Next Page
Loading...
Need help?
General