15. OTHER FUNCTIONS
15-11
15.4 Facsimile Receiver FAX-30
The FURUNO Facsimile Receiver FAX-30 installs in the NavNet TZtouch3 network
and can be controlled from a NavNet TZtouch3 display. Below are the steps to start
fax operation.
1. Connect the FAX-30 to the NavNet TZtouch3 network.
2. Open the home screen, then tap [FAX-30] (left side of screen).
3. Tap [WX FAX] or [NAVTEX].
4. Refer to the Operator’s Manual of the FAX-30 for operation information.
[Quick Self Test] Information for this equipment and connected sensors.
[Certification Mark] Show the certification marks this equipment has received.
[Service] Requires login password. For the service technician only.
[Event Input
Configuration]
Select the data to be entered as an event. [Off], [Event Mark],
[MOB], [Ferry]
[Update Network
Equipments]
Updates all NavNet equipment in the network. For the service technician.
[Sirius Radio
Diagnostic]
Check the satellite radio of the FURUNO BBWX weather receiver for proper
operation. See section 13.7.3.
[Sirius Weather
Diagnostic]
Check the weather section of the FURUNO BBWX weather receiver for
proper operation. See section 13.6.
[Reset Default
Settings]
Restore default settings for the [Initial Setup] menu.
Menu item Description Option (setting range)
To Next Page
Loading...
Need help?
General