4
Points/boundaries
Points can be entered on the plotter display (radar and fish finder displays also) to mark important locations such as
a good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points list.
Also, boundaries can be set at the position desired (net position, area to avoid, etc.)
Tap where to enter a point.
The point is entered
on the screen.
Tap a point or the location
to set as destination.
On-screen point Selected location
On-screen point
Points list
How to enter a point
Yellow line:
Shortest course from own
ship to the destination.
Purple line
(with arrow): Indicates
course to go to the
destination.
How to set a point as destination
Tap [Lists] on the
home screen.
Destination point
Lists
If a point was tapped.
NoticeNotice
Note: [Find on Chart] puts the
selected point at the screen center.
Sort the list by date, name, icon, color, range.
Tap the point to set as the destination.
Tap the point to set as the destination.
How to set a boundary
Tap the position where to
set a boundary.
Tap the shape to use for
the boundary.
[Area]/[Line]: Tap neces-
sary points to complete
the boundary, referring to
"Route" on the next page.
[Circle]: Drag icons to
adjust the size and
position, and then tap
[End Boundary].
To Next Page
Loading...
