Fusion Apollo MS-ERX400 - Page 3

Table of Contents
Getting Started 1
Stereo Screen 1
Controls 1
Using the Dial to Select Items 1
Entering Text 2
Control Screen 2
Naming the Device 2
Setting the Home Zone 2
Temporarily Selecting a Stereo to Control 2
Adjusting the Volume 2
Muting all Connected Stereos 2
Adjusting the Subwoofer Level 2
Selecting a Source 2
Adjusting the Backlight Brightness 2
Enabling Standby Mode 3
Turning Off Devices on the Network 3
Fusion PartyBus Networking 3
Creating a Group 3
Editing a Group 3
Leaving a Group 3
Network Source Considerations 3
General Settings 3
Power Options 4
Update Options 4
Network Settings 4
Setting the Device as a DHCP Client 4
Setting a Static IP Address 4
Configuring the Stereo for use with a Garmin Marine
Network 4
More Information 4
Registering Your ERX400 4
Cleaning the Device 4
Software Updates 4
Updating the Remote Control Software Using a USB Flash
Drive 4
Updating the Remote Control Software Using the Fusion Link
App 5
Troubleshooting 5
The stereo does not respond to key presses 5
Network Troubleshooting 5
Specifications 5
Dimensions 5
Index 7
Table of Contents i