Why is my Bluetooth audio cutting out on my Fusion Car Receiver?
Bluetooth technology works best when there is nothing blocking the signal. Make sure that your media player is not covered. Also, bring the media player within 10 m (33 ft.) of the stereo. After you pair your Bluetooth device, turn off the DISCOVERABLE setting. Wi‑Fi signals can interfere with Bluetooth connections, so turn off the Wi‑Fi setting if you are not using it.
How to troubleshoot network issues on Fusion PartyBus Car Receiver devices?
To troubleshoot network issues with Fusion PartyBus devices, make sure only one device (either a stereo or a router) is set up as a DHCP server. Check that all Fusion PartyBus devices, network switches, routers, and wireless access points are connected and turned on. For wireless devices, confirm they are connected to a wireless router or access point. Try changing the channel on your router or access point to fix interference. Disconnecting Bluetooth devices can also help. If using static IP addresses, ensure each device has a unique IP address with matching first three number sets and identical subnet masks. If problems persist after configuration changes, reset all network settings to the factory defaults.
General| Bluetooth | Yes |
|---|---|
| Digital Signal Processing (DSP) | Yes |
| Fusion-Link | Yes |
| Speaker Impedance | 4-8 Ohms |
| Audio Sources | Bluetooth, AM/FM, SiriusXM, AUX, USB |
| Amplifier | Class D |
| Connectivity | NMEA 2000 |
| SiriusXM | SiriusXM-Ready (USA only, requires optional SiriusXM Connect Vehicle Tuner) |
To Next Page
