Fusion Gator 250 User Manual

Gator Automatic Butt Fusion Range
Operating Manual
EDOI6922 Page 37 of 44 Issue 02
14 User diagnostics menu
To enter the user diagnostic menu turn on the unit, when the logo screen is
displayed press the red button then press the red button again.
14.1 Test / Calibration (01)
The options in test / Calibration allow the operator to test relevant parts of the
Gator machine.
Press the green button to enter the test / calibration menu option then use the up
and down buttons to select the relevant menu option then press green button to
enter the menu option.
14.1.1 Chassis diagnostics (01)
This option allows the checking of chassis recognition and chassis operation.
14.1.2 Trimmer diagnostics (02)
This option allows the checking of the trimmer operation.
14.1.3 Heater diagnostics (03)
This option allows the checking of the heater operation.
14.1.4 Computer diagnostics (04)
This option allows the checking of the computer operation.
14.1.5 Hydraulic diagnostics (05)
This option allows the checking of the hydraulic operation.
14.1.1 Test scanner (07)
The test scanner option allows the barcode scanner to be tested.
Scan a barcode then the barcode and the length of the barcode will be displayed
on the screen.

Fusion Gator 250 Specifications

General

Brand	Fusion
Model	Gator 250
Category	Power Tool
Language	English