Need help?Do you have a question about the FUTABA 2PL and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency | 2.4GHz |
| Modulation | FHSS |
| Wheel/Stick | Wheel |
| Display | LCD |
| EPA (End Point Adjustment) | Yes |
| ABS (Anti-Lock Brake System) | No |
| Steering Dual Rate | Yes |
| Throttle Dual Rate | No |
| Fail Safe | Yes |
| Power Supply | 4 x AA batteries |
| Weight | 400g |
Explains danger, warning, caution symbols and graphic symbols used in the manual.
Safety measures for preparing and operating the R/C model, including battery handling and running rules.
Guidelines for safely storing and disposing of the R/C system and Ni-cad batteries.
Important warnings regarding storage conditions and using genuine parts.
Lists system components and identifies transmitter/component parts and controls.
Step-by-step guide for replacing the AA batteries in the transmitter.
Instructions for connecting components and crucial checks to prevent loss of control.
Emphasizes using genuine parts and prohibits unauthorized disassembly for system integrity.
Procedures for setting up the transmitter, including trims for steering and throttle.
Functions for tuning steering sensitivity, managing models, and reversing servo direction.
Adjusting servo endpoints, ABS braking, and naming models for optimal performance.
Details on cancelling reverse, protection circuits, and LED display for the ESC.
Visual guide for initial setup including model selection, reset, and servo reversing.
Visual guide for advanced functions like EPA, ABS, and model naming.
Specifications for components and frequency information for US users.
Table of common problems and suggested actions for troubleshooting the R/C set.
To Next Page
