Need help?Do you have a question about the FUTABA 3pv-2.4g and is the answer not in the manual?
General| Frequency | 2.4GHz |
|---|---|
| Channels | 3 |
| Modulation | FHSS |
| Telemetry | No |
| Display | LCD |
| System | T-FHSS |
| Receiver | R203GF |
| Battery Type | 4 AA batteries |
| Model Memory | 10 |
Regulations and approvals needed when exporting the product from its country of manufacture.
Futaba's disclaimer regarding unauthorized modifications, adjustments, or part replacements.
Details on FCC compliance for radio frequency exposure limits and SAR evaluation.
Information on Futaba's participation in the RBRC program for battery recycling in the U.S.
FCC Part 15 compliance, interference limits, and user actions to correct interference.
Explanation of danger, warning, and caution symbols used throughout the manual.
Specific safety guidelines for operating the 2.4GHz spread spectrum system.
Essential safety measures to follow before and during the operation of the R/C system.
Steps for performing a range test to ensure proper system communication before operation.
Correct procedures for turning the transmitter and receiver power switches on and off.
Method for checking the fail-safe function to ensure proper response in case of signal loss.
Warnings regarding operating conditions, model visibility, and personal state.
Guidelines for storing NiCd batteries and precautions against leakage and damage.
Recommended conditions for storing the R/C system to prevent damage and operational issues.
Instructions for insulating and disposing of used batteries at recycling centers.
Safety tips for beginners, using genuine parts, and handling battery terminals.
Checking the package contents against the system's included items.
Description of R203GF and R314SB/R304SB receivers, their features, and connectors.
Information on using the telemetry system with compatible receivers and sensors.
Detailed description of the physical components and controls of the T3PV-2.4G transmitter.
Critical safety precautions related to the transmitter's built-in antenna and operation.
Proper procedures and warnings for inserting AA batteries into the transmitter.
Explanation of the low battery alarm and how to check transmitter battery voltage.
Guidelines for using optional rechargeable batteries and associated charging precautions.
Details on the transmitter's automatic power-off feature after a period of inactivity.
Navigating the Home screen and accessing various functions via menus and key presses.
Step-by-step guide for selecting and activating functions using transmitter keys.
Instructions for connecting receivers and servos for both electric and gas-powered models.
Proper placement of the receiver antenna for optimal range and signal reception.
Critical checks for connectors, linkages, and isolation from noise sources during assembly.
Warning against unauthorized disassembly of the radio control system parts.
Steps for linking the R203GF receiver with the transmitter using S-FHSS/FHSS.
Steps for linking T-FHSS receivers (R304SB/R314SB) with the transmitter.
Procedures for selecting and resetting model memory slots within the transmitter.
Instructions for installing servo horns and reversing servo operation direction.
Setting neutral, high, and brake maximum points for ESCs like MC231CR/MC331CR.
Managing model memories, including selection, reset, and naming for easy setup.
Configuring low battery warnings and setting the system type for receiver compatibility.
Setting up wireless link mode and configuring DT3/SW1 functions for transmitter control.
Adjusting the steering trim for neutral position and managing trim usage.
Adjusting neutral positions for throttle and channel-4 servos, including tips.
Setting sub-trim for neutral positions and dual rates for steering travel.
Limiting steering and throttle servo travel to prevent binding and damage.
Adjusting servo travel limits for channels 3 and 4 to prevent linkage issues.
Configuring 4-wheel steering and brake mixing functions for specialized control.
Reversing the rotation direction of steering, throttle, and channel-3 servos.
Reversing channel-4 servo and adjusting steering/throttle sensitivity (exponential).
Configuring throttle fail-safe and anti-lock braking (ABS) features for enhanced safety.
Procedure for copying model data between different memory slots.
Technical specifications and ratings for the transmitter and receivers.
Guidelines for requesting repairs, warranty service, and contact information for support.
To Next Page
