FUTABA T10J - User Manual

1M23N29204
INSTRUCTION MANUAL
10-ChannelDigitalProportionalR/CSystem
TM
TM

FUTABA T10J Specifications

General

Channels	10
Frequency	2.4GHz
Model Memory	30
Display	LCD
Telemetry	Yes
Weight	590g
Trainer Port	Yes
Modulation	S-FHSS
Power Supply	6V to 7.4V (2S LiPo)

Summary

Introduction

Safety Guidelines and Precautions

Explains flying safety, special markings, battery handling, and important precautions.

Before Use - System Setup

Transmitter Features and Controls

Overview of transmitter features, controls for different modes, and battery management.

Transmitter Control Layouts

Diagrams detailing transmitter controls for Airplane and Helicopter modes.

Battery Management and Safety

Instructions for battery installation, removal, charging, and safety precautions.

Radio Range Check and Linking

Procedure for linking transmitter/receiver and performing radio range checks.

Common Functions - Model Configuration

Servo Adjustments and Monitoring

Configure servo reverse, trim, end points, and perform monitoring/testing.

Helicopter Functions

Swash Plate and Gyro Settings

Adjust Swash AFR, Swash Mixing, Swash Ring, and Gyro Sensor settings.

Throttle and Pitch Curve Adjustments

Configure throttle and pitch curves, including idle-up and hold settings.

TX SETTING - System Configuration

Stick Mode and Calibration

Change transmitter stick modes and calibrate stick positions for accurate control.