FUTABA T10J - Model Type; Swash Type (for Heli); Wing Type (for Glider); ATL Trim On;Off

61
Commonfunction
①Selectthe"TYPE"itemand
thenselectthemodeltypeby
pressingthe+keyor‒key.
＋ −
or
● Thenewmodeltypeis
displayedonthescreen.
② PresstheJogkeyfor1second.
（1second）
● Confirmationmessage
"sure?"blinks.
③ Modeltypechangebypressing
theJogkey.
● Aconfirmation"beep"
soundsiscomplete.
Forsafety,adoublesettingsystemisused.Youneedtoconfirmyour
settingchangesbypressingthejogkey.Ifyoufailtopressthejogkey
andsee"COMPLETE"onyourscreen,yourchangedarenotsaved.
Selectionrange：
ACROBATIC,
HELICOPTER,GLIDER,MULTI
COPT
Modeltype
① Selectthe"SWASH"itemand
thenselecttheswashtypeby
pressingthe+keyor‒key.
＋ −
or
② PresstheJogkeyfor1second.
（1second）
● Confirmationmessage
"sure?"blinks.
③ Swashtypechangebypressing
theJogkey.
● Aconfirmation"beep"
soundsiscomplete.
Forsafety,adoublesettingsystemisused.Youneedtoconfirmyour
settingchangesbypressingthejogkey.Ifyoufailtopressthejogkey
andsee"COMPLETE"onyourscreen,yourchangedarenotsaved.
Selectionrange：H-1,HR3,
H-3,HE3,HN3,H-2,H-4,H4X
①Selectthe"WING"itemand
thenselecttheswashtypeby
pressingthe+keyor‒key.
＋ −
or
② PresstheJogkeyfor1second.
（1second）
● Confirmationmessage
"sure?"blinks.
③ Swashtypechangebypressing
theJogkey.
● Aconfirmation"beep"
soundsiscomplete.
Forsafety,adoublesettingsystemisused.Whenachangeiscancelled
aftertheconfirmationmessageisdisplayed,thechangeisnotmade
whenmovedtoanothersettingitembyJogkey.
Selectionrange：1AIL,2AIL,
2A+1F,2A+2F,2A+4F
Swashtype（forHeli）
Wingtype（forGlider）
①Selectthe"ATL"itemandchangethemodeby
pressingthe+keyor‒key.
＋ −
Selectionrange：ON,OFF
Default：OFF
ATLTrimON/OFF
or