FUTABA T10PX - User Manual

1M23Z08104
T10PX

Software Update Method
Wheneverimprovementsandnewfunctionsareavailable,thesoftwareofyourT10PXradiotransmittercan
beupdatedeasilyviaonlinefreeofcharge.Theupdatedsoftwarefilewillbeshownonourwebsite.You
candownloaditandmakeacopyonyourmicroSDcard.Belowistheprocedureforthesoftwareupdate.
3&
$FFHVVLVSRVVLEOHE\WKHZHE
PLFUR6'FDUG
1.
 Downloadthezipfileoftheupdatedatafromour
websiteoryourlocaldistributor'swebsite.
https://futabausa.com/
FutabaWEBsite
Software
Download
2.

 Extractthezipfileonyourcomputer.
3.

InsertthemicroSDcardintothePCandcopythe
FUTABAfolderexpandedonthePCtothemicro
SDcard.
IfyoualreadyhaveamicroSD
cardFUTABAfolder,overwriteit.
Updatingprocedure
Note:
Beforeyouupdatethesoftware,the
batterythatisconnectedtotheT10PX
shouldbefullycharged.
Note:
Duringthesoftwareupdate,themodel
datathatisstoredintheT10PXshouldbe
keptwithoutanychange.(NOTerased
andNOTchanged.)However,foryour
safety,makingabackupofyourmodel
databeforethesoftwareupdateishighly
recommended.
Requiredforupdate(Purchaseseparately)

FUTABA T10PX Specifications

General

Channels	10
Frequency	2.4GHz
Telemetry	Yes
Modulation	T-FHSS, S-FHSS
Display	4.3-inch full-color LCD touch screen

Summary

Required Items for T10 PX Software Update

T10 PX Software Update Procedure

Troubleshooting T10 PX Software Updates

Low Battery Error During Update

Software update is postponed due to low battery; recharge and retry.

Update File Not Found Error

Update file not found on microSD card; verify file copy.

Broken File Error During Update

Update file error detected; file may be broken or for another transmitter.

Write Error During Update

Software update procedure stopped for unknown reason; contact service center.

Checking T10 PX Transmitter Version

Checking R404 SBS(E) Receiver Version

Understanding Ultra Response (UR) Mode

Changing T10 PX Settings for UR Mode

Procedure to adjust T10PX settings for UR mode, requiring relink and power restart.

T10 PX Receiver Mode Precautions

URSR Servo Mode Compatibility

Use compatible UR/SR servos; using others may cause malfunction or damage.

Servo Connection Warnings

Avoid connecting incompatible servos to UR/SR modes to prevent damage.

Battery and Fail-safe Notes

Use correct receiver battery and transmitter fail-safe function for safety.

Changing UR Servo Settings

Wired vs. Wireless Servo Setting

Use wired method for initial UR/SR mode change; wireless for mode switching.

UR Servo Parameter Tip

Compatibility with HPS-CT701 Servos

Compatibility with MC971 CR

MC971 CR Torque Function Requirements

Torque level/end point requires specific ACUVANCE motors; others may not operate.

TrimDial Function for Linkage Menu Settings

Brake Display Selection for Instrument Panel

Time Initialization Fix