FUTABA T10PX - UR Servo Parameter Tip

Read the warning
and tap [Close]
Tap the
[
Close]
Tap the
[
Close]
Tap the [Communica-
tion port]
Select the UR
Type 1-4
The data of the
connected servo is
displayed.
Changed to UR mode
Read the connected UR servo data into the T10PX.
Change to UR mode, select UR type, and write data to the connected UR servo.
Remove the UR servo from the transmitter. It can be used as a servo in UR mode.
3
4
5
URmode
HOME screen Menu Accessory menu S.Bus servo
Turn on T10PX and call Menu
ĺ
Accessories Menu
ĺ
S.Bus servo screen.
2
Home button
Tap the
[
Read]
Tap the Mode setting
[
Normal]
Tap the UR mode
•Servoparametersetting"Frequency"
Huntingoccurswhentheservofrequencyissethigh,butthis
isnotamalfunction.Usebyloweringthefrequencyvalue.