Need help?Do you have a question about the FUTABA T18MZ and is the answer not in the manual?
General| Channels | 18 |
|---|---|
| Frequency | 2.4 GHz |
| Modulation | T-FHSS/S-FHSS |
| Display | Color |
| Battery | LiPo 2S |
Contact details for Futaba service and support in North America and abroad.
Overview of the T18MZ's key features and the transmitter's physical layout.
Details on physical controls, safety, LED, switches, volume, levers, trims, panel, keys, and panel lock.
Guides on stick adjustment, battery, connectors, SD card, USB, camera, receiver setup, and telemetry.
Instructions for charging batteries and turning the transmitter on/off.
Navigating the home screen, menus, and setting user preferences.
Lists and describes functions in System Menu, including trainer setup.
Adjusting LCD display, user name security, sound volume, music, and camera functions.
Adjusting hardware settings, stick response, and performing range checks.
Procedures for adding models, selecting types, and managing model data.
Linking flight surfaces and configuring throttle cut/idle down.
Using swash mix, pitch/rudder mixing, and managing flight conditions.
Overview of Linkage Menu and servo testing.
Selecting model types and system types, including receiver linking.
Configuring fail-safe and endpoint adjustments for safety and precision.
Monitoring telemetry data and configuring sensors.
Adjusting aileron differential, flap settings, and rudder mixing.
Configuring gyro sensitivity, V-tail, and aileron/elevator mixing.
Lists and describes functions specific to helicopter models.
Adjusting pitch and throttle curves for optimal helicopter flight response.
Switching modes, VR tuning, and setting condition delays for smooth transitions.
Configuring servo speed and assigning functions to switches.
Step-by-step guide for updating the transmitter's software via SD card.
Instructions for copying model data between transmitters and conversion.
To Next Page
