39
<System Menu>
SYSTEM MENU
System Menu functions table
[Trainer]: Starts and sets the trainer system.
[Display]: Display adjustment and auto power off setting.
[Date & Time]: Sets the date and time (system clock setting) and resets the timer.
[User Name]: User name registration and ID Pin number.
[Switch]: Toggle switch type setting (Set when the switch is replaced.)
[H/W Setting]: Hardware reverse / Stick setting / Calibration.
[Sund Volume]: Adjust the volume of: Key Operation/Error Warning/Trim&Center Click/Timer Event
[Camera]: Built in 0.3 megapixel camera.
[S.BUS Servo]: S.BUS servo setting.
[Information]: Displays the program version, SD card information, and product ID.
[Range Check]
:
The output of the transmitter is lowered, for Range checking.
The System Menu sets up functions of the
transmitter, this does not set up any model data.
To Next Page
Loading...
Need help?
General
