FUTABA T18MZ User Manual

102
<Model Menu (Common Functions)>
MODEL MENU (COMMON FUNCTIONS)
6\VWHP0HQX /LQNDJH0HQX 0RGHO0HQX 5HWXUQ
0RGHO &RQGLWLRQ

0RGHO0HQX
&RQGLWLRQ6HOHFW $)5'5 3URJ0L[HV
)ODS6HWWLQJ $,/WR&DPEHU)/3
$LUEUDNHWR(/( (/(WR&DPEHU
58'WR$,/
$,/'LíHUHQWLDO
6HUYR0RQLWRU
$,/WR58'
&DPEHU)/3WR(/(
&DPEHU0L[

$,/WR%UDNH)/3
58'WR(/(
6QDS5ROO
This section describes the AFR, program mixing,
and other functions common to all model types.
Before setting the model data, use the Model
Type function of the Linkage Menu to select the
model type matched to the fuselage. When another
model type is selected thereafter, the AFR, program
mixing, and other setting data are reset.
The functions in the Model Menu can be set for
each flight condition. When you want to use the
system by switching the settings for each condition
by switch, stick position, etc., use the Condition
Select function to add flight conditions. (Up to 8
conditions can be used)
Note: The T18MZ is designed so that the airplane
and glider (including EP glider) model types are
compatible with fuselages of similar type wings.
This section outlines the relationship between the
functions common to airplanes and gliders, except
some dedicated functions, and model type.
The setting items depend on the number of servos
and other differences according to the wing type
used, but reread them. The setup screens in the
instruction manual are typical examples.


Model Menu.

setup screen appears.
(Model Menu screen example)
*The Model Menu screen depends on the model type. This screen is for model type Airplane Wing Type 4AIL+4FLP.

Model Menu functions (Common) list

Servo test and servo position display (For a
description of its functions, see the Linkage Menu
section.)

Flight conditions addition, deletion, copy,
condition renaming, and condition delay can be set.

Sets the rudder angle and curve of all the
operation functions. A D/R curve which can be
switched with a switch, etc. can also be added.

Program mixing which can be freely customized.
Up to 10 mixes can be used for each condition.

Mixing used in needle adjustment of engines
which use a fuel mixture control carburetor.
[Airplane, helicopter]

FUTABA T18MZ Specifications

General

Brand	FUTABA
Model	T18MZ
Category	Remote Control
Language	English