103
<Model Menu (Common Functions)>
0RGHO
&RQGLWLRQ
&RQGLWLRQ6HOHFW
&RQGLWLRQ/LVW
&RQGLWLRQ
$GG 'HOD\ &RS\ 5HQDPH
3ULRULW\
Menu to call the setup screen shown below.
Condition Select
Flight conditions addition, deletion, copy, condition renaming, and condition
The functions in the Model Menu can be used by
switching the settings of up to 8 flight conditions
conditions. Add conditions, as required.
When you do not want to use the Condition
Select function, this setting is unnecessary. In
this case, use the flight conditions (Condition 1)
assigned at initial setting.
addition to ordinary toggle switch, is possible
as the flight condition selector switch, this
Unnecessary fuselage motion generated
when there are sudden changes in the servo
positions and when there are variations in
the operating time between channels during
condition switching can be suppressed. The
delay can be set for each channel.
switching destination condition, the
related function changes after a delay
corresponding to the set amount.
operation priority can be freely changed.
selected condition name is displayed on
added, give it a name which can be easily
(Conditions List)
1. Touch the condition whose priority
List.
condition has the highest priority.)
*The initial setting condition cannot be
moved. It has the lowest priority.
*Only the number of buttons corresponding to the
conditions which can be added are displayed.
the buttons.
*The selected conditions are added to Conditions
List.
switching.
(For a description of the switch selection method,
see next page.)
conditions is copied.
by touching the
condition you want to
button.
is touched, the
condition is reset. (To
abort resetting, touch
touching the condition
you want to rename in
3. Enter the new name from
appears on the screen.
name is registered. (To
abort registration, touch the
copy source conditions.
3. Next, select the condition by touching the copy
destination condition.
(Currently selected condition name)
setting
(For a description of
the setting method,
see the next page.)
To Next Page
Loading...
Need help?
General
