92
<Linkage Menu>
0RGHO
7ULP
8QLW
/67
567
/'
5'
/6
7
7
7
7
7
7
56
'LDO0RQLWRU
6WHS
&'
&RQGLWLRQ
Dial Monitor
Digital trim position display (T1-T6, CD)
The Dial Monitor displays the current position
and step amount of each Digital Trim. The trim step
can be set directly on the dial monitor.
VR and slide lever position display (LST, LS, LD,
RD, RS, RST)
Displays the current position (black ) and last
operating position (green ) of the VRs and slider
levers.
Knob and Lever Position display
(LD, RD, LS, LST, RS, RST)
The Dial Monitor displays the current position
and last operating position of each knob and lever.
Although neither knob nor lever can hold the last
operation position as they are “analog” type, the
position data during the last operation is memorized
lever to the position displayed on the monitor, the
last operation position is recalled.
Recalling Dial Position
(LST, LS, LD, RD, RS, RST)
The dial position data at the last operation is
displayed for each knob and lever in this monitor.
(Green arrow)
Digital trim step amount (T1-T6, CD)
The trim step of the T1-T6 and CD can be set
directly on the dial monitor menu.
To Next Page
Loading...
