101
<Linkage Menu>
Condition Hold
speed of the engine so that you may adjust flight
conditions when the engine is running. An alarm
indicates that the function is operating. It will
prevent the engine from racing dangerously when
While this function is active, the throttle servo
when the function is activated. You must deactivate
this function when you are through making
adjustments.
deactivate this function in either of the following
states:
To activate/deactivate Condition hold:
(Home screen)
*When this function is active, "Condition Hold is active"
appears on the screen.
(LINKAGE menu/MODEL menu)
*Operation is displayed at the bottom of the menu.
Function ON: "ON" is displayed.
Function OFF: "INH" is displayed.
To Next Page
Loading...
