60
<Model Basic Setting Procedure>
5. Throttle curve setting
This function adjusts the pitch operation curve
in relation to the movement of the throttle stick for
each condition.
(17 points curve)
The pitch curve can be freely selected from linear
operation curve to smooth curve, and adjusted to
match the curve you want by means of the T18MZ’s
powerful Curve Edit Function (6 types of curves can
be selected). Up to 17 points can be set for linear
smooth curve can be created by selecting the curve
type and reducing the number of input points to 3
or 5, and then entering the specified value at the
corresponding points that you created.
Call the throttle curve of each condition with the
condition select switch.
4. Fuselage linkage
Connect the throttle rudder, ailerons, elevators,
pitch, and other rudder linkages in accordance with
the kit instruction manual. For a description of
the connection method, see "Receiver and Servos
Connection".
*The channel assignment of the T18MZ is different from
that of our existing systems. (The channel assigned to
each function can be checked at the Function menu of the
Linkage Menu.)
To Next Page
Loading...
Need help?
General
