FUTABA T10J User Manual

170
Multicopter
Function
Method
①Callthemenuscreenfromthe
homescreenbypressingthe +
keyfor1second.
＋
② Select
fromthemenuwiththe
Jogkey.
③Openthesettingscreenby
pressingtheJogkey.
（1second）
Callingthesettingscreen
■ Activatingthefunction
＋ −
or
①Selectthe"MIX"item
andthenselectthe
"ON"bypressingthe+
keyor‒key.
● Whenyoudonotuseafunction,settothe
"INH"side.
■ Sensitivityswitchselection
②Selectthe"SW"itemandthenselectthe
switchbypressingthe+keyor‒key.
Range：SwA 〜 SwH、Default：SwA
■ Sensitivitysettingchannelselection
＋ −
or
③ Selectthe
"CH"itemand
thenselect
thesensitivity
settingchannelbypressingthe+key
or‒key.
Range：CH5、CH5/CH7、
CH5/CH8、CH5/CH7/CH8
Default：CH5
■ Gyrotypeandsensitivitysetting
④PresstheJogkeyandselectthesensitivitysetting
screenyouwanttosetandthenset“type”(gyrotype)
and“rate”(gyrosensitivity)ofeachchannelbypressing
the+keyor‒key.
（"type"）Range：STD,GY Default：STD
（"rate"）Range：0〜100%（STD）,NOR100 〜 0 〜
AVC100%（GY） Default：50%（STD）,0%（GY）
● Whenyouwanttoreturnthesetvaluetotheinitial
value,pressthe+keyand‒keysimultaneously.
GYROSENS
＋ −
or
This function is dedicated mixing for switching
the gyro sensitivity and gyro mode (AVCS/
NORMAL) of Futaba gyros. Up to 3 axes can be
set. The attitude control of multicopter uses the
system of multicopter attachment.
This "GYROSENS" will be used for accessories,
such as camera control.
ŏ7KHVHQVLWLYLW\VZLWFKFDQEHVHOHFWHGDQGWKH
VHQVLWLYLW\RIHDFKGLUHFWLRQRIWKHVZLWFKFDQEH
VHW6ZLWFKHV$WR+
ŏ&+&+&+&+&+RU&+&+&+
FRPELQDWLRQVFDQEHVHOHFWHGDVWKHVHQVLWLYLW\
VHWWLQJFKDQQHO
*Whenthisfunctionisused,itbecomesimpossiblefor
CH5touseitformulticoptercontroller.
UseCH6formulticoptercontrolleranduseSwC.
"GYROSENS"
GYROSENS
Gyrosensor
(MULTICOPT)

Activatingthefunction
GainChannelselection
Switchdirection
Gyrotype,
Gainrate
● Whennotusingthisfunction,
selectINH.
Gainswitchselection
（Currentswitchoperating
direction）
● Switchestothe
sensitivitysetting
screenofeachswitch
directionwhenthe
Jogkeyispressed.
● Selectthesettingitem
withtheJogkey.
（Gyrotype） （GyroGain）
● WhenusingaFutabaGYAgyro,selectgyrotypeGY.Thisswitchesthegyrosensitivitysetting
itemtomodeandsensitivitydirectreadingdisplay.
*<526(16

FUTABA T10J Specifications

General

Channels	10
Frequency	2.4GHz
Model Memory	30
Display	LCD
Telemetry	Yes
Weight	590g
Trainer Port	Yes
Modulation	S-FHSS
Power Supply	6V to 7.4V (2S LiPo)