FUTABA T10J - Selection of Condition; Setup of Rate

139
Helicopter
■ Activatingthefunction
＋ −
or
①Selectthe"MIX"
itemandthen
selectthe"ON"by
pressingthe+key
or‒key.
● Whenyoudonotuseafunction,setto
the"INH"side.
■ Selectionofcondition
＋ −
or
②Selectthe"CND"itemand
selectionofconditionby
pressingthe+keyor‒
key.
Range：NORM,IDL1/2,IDL3
■ Setupofrate
＋ −
or
③
Selecteachfunctionitemof"HI"or
"LO"andsettheratebypressingthe
+keyor‒key.
Range：-100 〜 +100%
Default(NORM)：-20%(LOW)、+20%(HIGH)
Default(IDL1/2/3)：0%(LOW)、0%(HIGH)
● Whenyouwanttoreturnthesetvaluetotheinitialvalue,
pressthe+keyand‒keysimultaneously.
Pitch → Ruddermixing
Activatingthefunction
Selectionofcondition
HighsideSetupofrate
LowsideSetupofrate
● Whennotusingthisfunction,
selectINH.
（presentswitchposition）
● Selectthesettingitem
withtheJogkey.
（Rate）
5(920,;